114GQC

Gotta say my first impression is very positive. It works extremely well on concrete, I haven't tried to work on metal so I can't say how well it works for that. It's impact strength is pretty good it nearly embedded itself into the concrete I was trying to chip away at. It has a decent weight and for me I was getting a bit tired around the end of the duty cycle of my air compressor which I would say makes it pretty good. It's size is perfect for smaller jobs I would say that it's also pretty durable.

Quick delivery overnight helped me to continue working on my ancient trailer that I am rebuilding. Purchased the trailer from Home Depot back in the early 90’s and worked well for our needs. Cost ratio is good and the zip gun as we call it around here worked incredibly well. My old one would not provide enough force to break over a dozen carriage bolts that were rusted. This did! The chisels with this are good and not too light. I purchased a different set to use with this gun and the metal chisels were all too soft so went back and used the chisels that came along with the gun and worked well. As another reviewer pointed out, make sure you add pneumatic gun which would help the gun work properly. I had some oil but couldn’t find it and I think it would have worked much better if I oiled it first.

Excellent tool

The Ingersoll Rand 114GQC Air Hammer is a compact and powerful tool designed for various automotive and industrial applications. This air-powered hammer is built for heavy-duty use, making it a popular choice among professionals and DIY enthusiasts alike. After using the 114GQC, I would rate my overall satisfaction level as a solid 4 out of 5.Build Quality:The Ingersoll Rand 114GQC boasts a robust construction that feels durable and reliable in hand. The metal housing and sturdy components suggest that this tool can withstand the rigors of frequent use. It’s clear that Ingersoll Rand has designed this air hammer to last, which is a major plus for anyone looking for longevity in their tools.Value for Money:In terms of value, the 114GQC offers a good balance between price and performance. While it might be on the higher end compared to some competitors, the quality and effectiveness justify the investment. For professionals who rely on their tools daily, the price is well worth it.Ease of Use:This air hammer is relatively easy to operate, even for those who may be new to using pneumatic tools. The controls are intuitive, and the lightweight design makes it manageable during extended use. However, it’s advisable to have a proper air compressor to maximize its efficiency.Speed:The speed at which this air hammer operates is impressive. It delivers quick bursts of power, making it effective for tasks like cutting, chiseling, or removing rusted bolts. The high-speed performance significantly reduces the time needed for various applications.Ease of Removal:When it comes to removing stubborn components, the 114GQC performs admirably. It effectively loosens parts that may be stuck or corroded, allowing for easier disassembly. This feature is particularly useful in automotive repair or restoration projects.Grip:The grip of the Ingersoll Rand 114GQC is designed for comfort and control. The rubberized handle provides a secure hold, reducing the risk of slipping during operation. This ergonomic design is essential for minimizing fatigue, especially during prolonged use.Power:While the power is generally strong, I found it lacking a little bit in certain heavy-duty applications. It performs well for most tasks, but for those needing extreme force, it might not be sufficient. However, it still gets the job done for the majority of users.In my personal experience, the Ingersoll Rand 114GQC has proven to be a reliable and effective air hammer. While it could use a bit more power for the toughest jobs, it excels in speed, ease of use, and overall quality. I would recommend this tool to anyone in need of a dependable air hammer, especially if you are looking for a balance of performance and affordability. Just ensure your air compressor can keep up with its demands for optimal performance.

I’ve been using this Ingersoll Rand 114GQC air hammer and it’s been solid. Plenty of power for stubborn bolts, exhaust work, and general shop use. The quick-change feature is a big plus makes swapping bits fast and easy without slowing you down. Build quality feels durable and it holds up well under regular use. Definitely a great tool for both DIY and professional work. Would buy again.

In the Product Information Manual under Warning (Pages 2 and 3) stipulate:1. Put 6 cubic cm (6 ml) of solvent in the air inlet and operate the tool for 15 seconds. I used break cleaner.2. Then put 3 cubic cm (3 ml) of Ingersol-Rand #10 oil into the air inlet and operate for 5 seconds.Note:a. You must hold the trigger all the way down while you put in the solvent and oil or the inlet will not accept the 6 cubic cm’s of solvent or the 3 cubic cm’s of oil.b. You can use a rag or folded paper towel held tightly over the discharge opening of the gun or it will not operate and the solvent or oil will not work its way through the gun. I wore an apron because the spray/mist will blast out.3. Quick Change Retainer:a. First install the quick-change retainer onto the gun and torque for 4 lb. ft. I used a 3/4-inch internal pipe wrench/grip extractor with the appropriate attachments so the 1/4-inch torque wrench could be used.b. Then tighten the 3 Allen set screws to 9 lb. in’s. Go around in the retainer keeping track that the amount of exposed threads for each set screw is the same until the torque for each set screw reaches 9 lb. in's. I used a digital torque wrench (1/4’ drive) and a 3 mm hex bit socket.4. Done – ready for use. The gun works great for my application – automotive. I use the SUNEX TOOL Air Hammer Chisel and Separator Set

This air hammer worked great. I used it to remove bushings from some leaf springs on a 39 Plymouth and it did the job easily. I cut thru the bushings from end to end then folded up the edges. Then put it against an edge and drove it straight out. The bushings didn’t have a chance.Before I used the tool I read the instructions and they said that the tool was coated with an anti- rust compound both inside and out. Use a suitable cleaner to remove then oil before using. Then plug in and operate for 5 seconds. Then pour oil in it and operate for 15 seconds. I have no idea what a suitable cleaner would be. I thought about mineral spirits but decided to use carburetor cleaner in a spray can. Stuck the red straw down the air supply hole and filled it up. Squeezed the trigger, filled with oil and ran it again. I used Kobalt air tool oil from Lowes.I was somewhat concerned because reading questions and answers concerning air compressor CFM it seemed this tool needed 90psi with 20 CFM under load, 4 CFM with no load. My compressor is 1.9 hp, 27 gal that puts out 5.8 CFM at 90psi. I’ve included a pic of it. I had no problems, the tool worked just fine. I use a drier system on my airline so I have 2 regulaters. One at the compressor I set for 110 psi. Coming from the drier I set at 80psi while squeezing the trigger of the tool. When I put it to the bushings, it went thru them like melted butter.This tool really saved me a lot of time and headache. I’m glad I decided to try even with my concerns.

Best tool from the best air tool company at this price! Who are you kidding. If you ever see a quick change Ingersoll Rand tool at this price buy it. So far we have two in the shop, probably going to add another soon.

Propaganda enganosa! Não cumpre o que promete, dinheiro jogado fora, não sei como uma empresa de nome lança um produto que não funciona mesmo com a mangueira de alta vazão não consegue cortar um simples pino de aço.

I like the product but it take time for delivery

Perfect for the job. Nice quality build & easy on the hand. Unfortunately, one didn't stand up too well & corroded after just 3 days of use. Photo #2 shows the worst one, after just 3 days use underground:(

everything is fine

Great tool excellent price