Spectra Premium S10404 Crankshaft Position Sensor

Just as I read from some other JKU's (mine is 2012), I was starting to have an issue where the Jeep would just lose all power and die. Had to pull over on the Autobahn, which is not an ideal situation. So, after this happened 2x (both random times), I did some research and most people recommended changing this part. I finally got the part, had it installed (bolt snapped when I tried to replace it) and I have not had any reoccurrence of a stall yet (1 week so far and drove it every day.

I have a 2012 Jeep JK and was having a problem when i went to put it in drive it would stall every time i thought the IDLE had to be turned up i asked a Mechanic and they told me Idle was fine So i ended up doing a little research and found out it was the Crankshaft Position Sensor. SO a long story short i am happy it was a very cheap FIX .

I don’t know how or why but this widget fixed problems with stalling at idol, fixed rough shifting with high acceleration and improved gas mileage.

Does fit 2015 JK wrangler 3.6

Good price and easy to install.

2016 wrangler jku. Part was solid and an exact fit. With a short socket and crawling under the vehicle it took me maybe 10 to 15 minutes going slowly. It's a fairly early review but after testing the symptoms they have all disappeared immediately after changing. So if you're having some symptoms like stalling out or some vibrations when you change gears. Start out with the easy fixes first. This 20 dollar part probably saved me hundreds or more had I just took it to a dealer and unknowingly had them do some crap like a new torque converter or mounts. Thank god for the internet.

This crankshaft sensor works and fits perfectly. My 2012 Jeep Wrangler with 68K miles had an intermittent jerking and bucking condition especially when it was windy and cold outside. No kind of codes were ever retrieved or stored; my local Jeep dealership were unable to find or fix the problem. The problem finally got a little more consistent where I could track it down. Vehicle would stall out when put into reverse without warming up engine when temps were cold. Replaced the crank sensor and all issues went away.

My 4dr 2013 Jeep JK with 130k miles was hesitating at low RPMs and cutting off completely when at a complete stop or when changing gears. I was having to turn the jeep off put it in park before restarting to get going. This put me in some potentially dangerous situations so I had to find a fix.I tried a lot of other fixes before I found a forum sayin this may be the culprit. Cheap and easy fix, one 10mm screw under the passenger side, 5 minutes and it was done. I can confirm that his part does work.

Comme l original