iBrightstar 3157 LED Bulb Red, 3057 LED Brake Lights Bulbs Super Bright for Rear Brake Lights and Tail Lights, 2 Pack

My husband installed these iBrightstar 3157 amber LED bulbs on his truck, and he’s very happy with the results. The installation was straightforward, and the bulbs immediately made a noticeable difference in brightness compared to the original ones. So far, the quality seems very good, and they are still working perfectly without any issues. They give the truck a clean, modern look and feel durable. Overall, a great upgrade and definitely worth it.

I picked these up to replace the brake lights on my 2017 Nissan Rogue Sport, and the difference is night and day. The performance is excellent. They are significantly brighter than the stock halogen bulbs, and the deep red color looks much more modern. One of the best features of switching to LED is the instant-on response when you hit the brakes; there is no fade-in time like with old bulbs, which I feel makes the car safer. They were true plug-and-play; once I got them into the socket, they worked immediately with no hyper-flashing issues because I'm not using that specific socket. A Note on Installation: If you have a Rogue Sport, be prepared for a bit of a struggle installing these. This is not the product's fault, but rather the design of the car (you have to remove tight panels/assemblies to get to the socket). Just know that the bulbs fit perfectly once you actually get to the housing. Pros: Very Bright: Huge improvement over stock. Response Time: The instant on/off LED triggers faster than standard bulbs. Value: Great price for a 2-pack. Fitment: Plugged right in without modification. Cons: None for the product itself (though installation on a Nissan Rogue is tricky due to the car's design). If you are willing to put in the work to get the taillights open, these bulbs are 100% worth the effort. They look great and work perfectly.

My husband installed these bulbs in his 2010 Chevy, and even after almost a year they are still working perfectly. The light is bright with a clean white color, which makes visibility much better at night. So far they have been reliable and continue to perform just as expected. Overall, we are very satisfied with the quality and durability.

I'll start with the good. These lights are definitely brighter than the incandescent bulbs they replace. They also run a lot cooler and pull less current. As for installation, I had two issues. The first was not the fault of the bulbs. It was not an easy task to get to the bulb holder in my 2015 Impala. It was even worse putting it all back together. Youtube has some videos on the process and they make it look much easier than it is. The second issue was that the holder is keyed and these new bulbs did not match the key. So it was impossible to push the bulbs all the way in. I can only hope that vibration does not cause them to fall out. Now for the main concern, and this one I don't know if it is going to be a problem or not. When the lights are "off", they stay on, but very dim. I can't see how anything about them would be causing this, so my assumption is, and if anyone can confirm or deny it, please do, the car is sending a low voltage signal to the bulbs to let the car's computer know if a bulb is out. On the original bulb this would not be enough to show up. But on the LED bulbs it is. It is hardly noticeable during the day, but at night it is quite evident. My concern is that this could possibly drain the battery if the car sits for a long time. It may be such a small current that my concern is unfounded. I would appreciate any feedback on this. I can't say if I would recommend these, as your particular situation might be better or worse. If they last a long time without falling out and without draining the battery, then I will be completely pleased with my purchase. UPDATE #1: After doing some research I learned that the light goes dim because the high impedence of the bulbs prevents the BCM (body control module) from going to sleep. So it would not be the bulbs, but the BCM that would drain the car's battery. One fix would be to install some 6 ohm 50W resistors. I may do that. But my fix was to replace one of the LEDs with an original bulb. That worked. So for now I have one bright LED and one dim OEM bulb, and one spare of each. I wrote to the manufacturer describing my issue and they have offered to provide the resistors. I am waiting to see if the LED bulb will stay in place before doing any more work. UPDATE #2: After installing one of the bulbs and leaving the other original bulb in place, I took a long trip. I went over the usual pot holes and railroad tracks and the new bulb stayed put. So even though it did not insert fully into the socket, it inserted far enough to function properly. In order to replace both bulbs without the problem of dimming, I contacted the seller and they offered to pay for a resistor kit which is the same thing used to prevent rapid flashing when the bulbs are used for turn signals. I ordered the resistors on Amazon and have received a refund for the amount of the order. It has all worked out quite well, and I can now recommend these bulbs.

Ok ya'll don't get this confused with other bulbs. This for my 2016 Tundra SR5 Brake Lights ONLY. These will not work for turn signals. Also, the amber versions work great for the DRL/Front Turn signals. Watch out for the contact wires when you insert these bulbs, they will break easily if not installed correctly. It will go in, don't force it. If you force it, your doing something wrong. Should just slide in and click. Again, these work great, will need to invest in a resistor as they do cause the "quick flashing" over the normal incandescent versions. Not worried about it, but it will need one if that bothers you. Super bright, fit correctly for the correct location. A great value for the money if your wanting that LED look. I bought them thinking it was for the turn signal light I had that was out. Come to find, it was just loose. Went ahead and swapped out the break lights with these, really bright, easy instal, look great.

Nice LED lights, much brighter than the original ones. I like that these LEDs are shining red on its own, unlike the original normal bulbs. The red film on my Mazda 3 taillights started to peel off in places making the white light seep through. This was caused by the heat from the original bulbs. The red LEDs fixed both problems.

I bought two sets red and one amber set of these for my 2007 Silverado. I previously swopped out the flasher to support LED lights. One set of red for each side in the back for turn and break lights. The amber set for the front turn signal lights. Changing one bulb at a time and testing each time, front and back, only one set of red worked properly but the other set made the turn signals freeze up. I did the swop test to verify and the problem followed the bulbs and it did so I am returning one set. On the bright side, these bulbs are very bright and work great for the tail lights. My guess is that they don't have enough blinker resistance built in so the one set is on the weeker side and caused problems. I'm going to try a different brand for the rear turn signals. Update. It turns out the reason I thought these caused problems was one of my side marker bulbs was out causing the left turn signal to freeze when I installed these bulbs. To be fair, I'm changing my review to 5 stars.

it doesnt fit on my lincoln mkx 2012, waste of time