Dual Display Air Suspension Gauge Air Ride Air Pressure Gauge 2Inch 0-220PSI with 2Pcs 1/8NPT Sensors and 16.5ft Sensor Cable LCD Red

I used this to monitor my air pressure in my dual-side air ride system. I like the way it looks and the responsiveness of the gauge is real-time... I can see the numbers move if I jump around in the bed of my truck. I couldn't detect any leaks and the hookup was very easy. It seemed to read just a bit high, but it wasn't enough for me to be concerned about.Simple and effective. Plenty of cable length included.

Mine reads about 3 PSI low at 50 PSI, and they are about 0.5 PSI off from each other.Fine for my application.It was easy to install.I do like the look.

Just installed this gauge to replace the stock one that came with my Firestone air bags (developed a leak). I also have an air tank on my truck as well so now I can monitor both systems in one spot. Everything is plug and play except the positive and ground near the gauge itself. My air bag system didn’t have a good place to screw the sensor into so I used 2 female 5/16” quick connects and a couple of t quick connects to just tap into the air lines. Took less than 10 minutes to install, and about 30 minutes to hide wires. Installed on 2015 Ford F-250. Quality seems to be decent, especially for the price.

exactly how described and expected

Impressed by how well it looks and works. Already did 1 trip hauling a trailer and could see exactly what bag had how much pressure. It was very comforting being able to keep your eye on your systems.

Took awhile to wire up, I’m running this to an air ride system on a 40ft pj gooseneck trailer via some waterproof connectors in the bed of my ram 3500. However, as you can see in the photo the front of my gauge had some kind of material on it maybe packaging glue? Trying to reach out to see if it’s possible to replace just the gauge as I don’t want to return and take out all of it?

Pressure is definitely a little off but at least there consistent. Pressure reads 95 when it’s more like 105. Good enough to level out vehicle

I had a Shop install all the airbags on my truck, but they did not put an air gauge in.I thought this was going to be a difficult task running hoses to the dash, to my surprise. It’s an easy screwed adapter on the valves and a simple wire all the way to the dash. the gauges are nice and bright and seems pretty accurate.

I wanted one to show compressor pressure and airbag pressure. Perfect for that, but definitely reads about 5psi higher pressure than what I am actually running. One of the sensors failed after a month of use. It's showing 178psi. The seller doesn't sell the sensor separately, now I'm on my own to find a replacement.