MUSETEX Mesh Micro-ATX Case 5 PCS ARGB Fans Pre-Installed 2× USB 3.0 Ports Opening Tempered Glass Panel & Mesh Front Panel Airflow Matx Gaming PC Case Tower (MK7-GN5)
Description
- About this item
- 【More Space】MUSETEX MK7 series Matx PC case has 4MM Tempered Door Opening Design and Mesh Front Panel,make it easy and free to disassemble and install computer accessories, and allow maximum airflow to provide cooling for your power supply. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；Micro ATX/ITX motherboard; 120mm/240mm/280mm water cooling; maximum length 340mm GPU（installing vertically or horizontally）; maximum length 180mm CPU air cooling; maximum length 200mm PSU. 【Outstanding Airflow】Large front panel metal mesh and 5pcs 120mm MUSETEX ARGB fans are pre-installed for the case to provide lighting and excellent airflow at the same time,keep cooling with the case.This widest case in all micro cases，the width of this case is 230mm, there is still 38mm distance between GPU and the front glass panel after installing vertical graphics card, which will keep your system cooling. 【Multiple ARGB Modes】 Button control has 19 lighting modes ;Motherboard control: it connected to the 5V 3PIN header on motherboard, the motherboard control can be unlimited ARGB fans modes (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, it is recommended to use button control only) 【Dust-proof Design】The Micro-atx PC case is equipped with 2pcs dust filter , and the top magnetic strip dust filter protects the case ; other is PSU dust filter easy for install and cleaning on the bottom. 【TOP I/O PANEL】2 x USB3.0 Port, 2 x HD Audio, LED Button, Power,Reset. Motherboard Compatability: Micro-ATX/ Mini-ITX （Not for ATX motherboard）
The Musetex computer case is a Micro-ATX tower PC case designed for e-sports and advanced gamers. It features a firm tempered glass panel. All vegan color coating throughout the inside and out for a sophisticated and stylish look, and it also comes with 5 built-in ARGB LED fans. Its appearance and function are what you want most. Details: Color: Black Case Material: Steel chassis / ABS / Tempered Glass. Motherboard Compatibility: Micro-ATX and Mini-ITX. Features: Mesh Front Panel & Tempered Side Glass Panel Design Number of dust filters: 2 Filter locations: top (fan) / under the unit (PSU compartment) Two Lighting Control Methods ARGB fan refers to addressable and programmable, that is every light-emitting point on the fan can be controlled, and the color changes are very rich, which is more fashionable and dazzling compared with ordinary RGB. 1.Botton Control There are 19 modes of ARGB lighting effects. Press the LED button on the I/O panel to easily switch the ARGB fan light. (Press the LED button twice to return to the original model) 2.Motherboard Control Musetex motherboard cable only suitable for 5V 3PIN header. (press the button for three seconds to switch to motherboard mode) Forbidden try to connect the 12V 4PIN header with the motherboard cable, If your motherboard is a 12V 4PIN header, please only use the button to control the ARGB fans to change the color. CPU COOLER HEIGHT CLEARANCE 180mm PSU PSU: Max.Length: 200mm. Power Supply Mounting Type: bottom Mount. GPU LENGTH CLEARANCE 340mm DRIVES 3 x 2.5" SSD / 2 x 3.5" HDD EXPANSION SLOTS 6 slots Item Dimension (L"x W"x H") 16.54 x 9 x 15.35 Weight 14 LB
Reviews
R**E
get your own fans.
I will say that this design was stupid in a number of ways. The fans are in the way during the installation of the motherboard and should have been at least 1/2 inch higher than they are and because of that you almost have to remove the fans to install the motherboard. secondly, the fan all connects to a connector and gets power from a SATA power plug meaning you have no control over the fan speed. If you want to be able to control the fan speed via your motherboard you will need to get new fans. Since the fans run at full speed all the time that means this is louder than it needs to be. I feel that this was poorly designed and poorly executed. If I didn't need a case asap I would send it back and get a better one. It also only has usb3 ports on the front. It would be better if it also had regular USB ports as well.
W**R
Very nice PC case for a great price
This PC case was perfect for my mini ATX Build, I wanted to upgrade my old desktop that I purchased back in 2011. What i wanted wouldn't have been feasible and wouldn't support the motherboard set up. So I decided to start from scratch. My plan was to have a computer 4k capable for gaming and the ability to allow me to stream content without any strain on the computer's performance. The end result a gaming PC masterpiece. I have much room to spare for future up grades and the my new gaming desktop looks awesome! If your planning a build you can't go wrong with this case if it's the right set up for the motherboard you want to use.
S**O
Great Case!
Excellent space for a micro case. Easy to build in with nice features. Rgb fans worked well and easy to connect to motherboard. Bought a second one for another build. Both PCs came out great with high marks from the users.
Common Questions
Trustpilot
1 month ago
2 weeks ago
Get the App
