The Original Snow Pusher 24" Wide Model

Seems sturdy and well-made. Be aware that this is called a Snowplow, Snowpusher, It is NOT a standard snow shovel. It excels at pushing snow like a plow...just as it's named. Not for lifting snow and throwing it to the side. Keep it down and move the snow. It works great if you use it for its intended purpose and design. The 30 inch is perfect for me. I'm loving it.

this is the best shovel I’ve used for light snow (2-3” wet, 4-5” for powder). The blade feels indestructible, perfect if you have a big driveway and worry about flimsy plastic blades). The shaft has heft and a solid feel, makes pushing the snow easy. It’s been a rough winter already in New England, but the Snowplow pusher has made clearing the driveway a lot easier. My only complaint is it comes with a few screws that fasten the blade to the metal shaft and it’s pretty hard to penetrate the metal. I gave up and it frankly doesn’t hurt performance, but they should have pre-drilled holes to make that easier.

Great for clearing lighter (3ish inches) snowfalls. This and their scoop have you covered. It's made of a really tough, durable, slippery material snow doesn't stick to. My only criticism is the four hex head fasteners supplied to hold the shovel to its' mounting bracket. I replaced them with stainless steel button heads to eliminate a place for snow to stick.

If you do not have one of these and you live where you get snow, you have to get one of these. It works so great on flat smooth surfaces. I can clean a driveway with 3 inches of snow so quickly. It is NOT a snow shovel. I pushed the snow as far as you can move it. It does not work well where your sidewalks are uneven.

This is a great shovel. I owned the 48” model when I lived in MN, and used it for more than a decade, and loved it. But in MN, you can go into any hardware store, and buy one of these already assembled, ready-to-go. Now I live in NC, and when I went to the store looking for a snow-shovel (which we rarely need), I just got confused looks. So I bought this 24” one on Amazon. There are a LOT of negative reviews, mostly complaining about assembly issues, or missing hardware. So let me set the record straight. YES you will need tools and some mechanical aptitude to assemble this shovel – so know that in advance. Why can’t the manufacturer make this clear in the description? Better yet, why can’t the manufacturer pre-drill pilot holes, and make this a lot easier for everyone? But having said that – it really is a high-quality, very sturdy shovel, and the included hardware is top-quality stainless. OK – here is what you need to know: First of all, the hardware is hiding. They stuff the bag of hardware into the cylindrical socket in the brace – where the handle inserts into – and where you would NEVER see it if you didn’t know to look there. As a guy who never reads instructions, I too was certain it had been shipped without hardware, until I noticed the sticker telling me where to look. Next – to assemble the blade to the brace, you will need TWO 7/16” wrenches, one for the bolt, and one for the Nylock nut. I used a 7/16” socket plus an open-end wrench. A crescent wrench or even a pliers can hold one end if that’s all you have handy. First get all the bolts assembled in their (pre-drilled) holes, but don’t tighten yet. Then go back and tighten-up the bolts across the blade, and finally the one on top. No need to really torque them down, just reasonable hand tighten so you don’t deform the plastic. (by the way this is REALLY high-quality plastic – incredibly tough and sturdy). This is the easy part. Finally – we get to what all the complaints are about: there are 3 self-drilling/tapping stainless screws which are intended to drill through the plastic brace, and then drill and thread into the thin steel tube of the handle, thus securing it to the blade assembly. There are no pilot-holes – you as the assembler, have to run these fasteners at the correct speed to drill through two different materials, and then not over-torque them and strip-out the screw in the handle. This is where everyone is complaining that you need a power screwdriver. Its true – no way you could do this with a hand screwdriver. In addition, while doing this drilling/tapping operation, you have to make sure the handle is fully inserted to the proper depth, AND the handle is rotated to the correct position. I’m an experienced machinist, yet I can completely understand why many would be hesitant with this step. If you have never used a fastener like this, you have no room for error – either it works for you the first time, or not. If you don’t have a pristine Phillips #2 head on your drill/driver, chances are that, even if you do everything perfectly, the screw can slip and get away from you while trying to drill into the side of a steel tube with no centerpunch, and go sideways. Moreover – once you finally drill through the steel tube of the handle, now the threaded portion engages, and with your drill still spinning at high-speed, the threads could rapidly hit bottom and strip-out the steel tube. Be careful. Take it slow. Or – better yet, pre-drill pilot holes with a 1/8” drill – then it is easy to thread the self- drilling/tapping screws in, even with a regular Phillips driver. With successful assembly, this shovel is great – I would give it 5-stars. But because of the assembly issues which are going to be a problem for many people, I have to subtract a star.

I love this shovel for 1-2" snow falls. Makes quick work for a driveway the width of a 3 car garage. Very light weight and easy to push the snow. Wish I had not waited so long to get this shovel. I got the 48" version and have no regrets. Has exceeded my expectations.

Assembly took about 30 minutes because I didn’t have the right tools. A ratchet for the bolts and a drill for the self-tapping handle screws would make the process much faster. The shovel is very sturdy. It’s heavier than expected, with a metal shaft and plastic blade/components. It feels durable and capable of handling abuse, but it’s not something you’d want to throw around. This is not ideal for lifting snow — where it truly excels is pushing. It performed very well clearing under 3 inches of snow and scraping down packed, run-over snow on my driveway. Think of this more as a plow or pusher than a traditional shovel. If you have a solid covering of snow, this is the tool you grab. Replacement parts are available and relatively inexpensive, which makes it a good long-term purchase. It’s definitely worth the one-time buy, with the option to replace parts down the line if needed. Overall, it’s excellent at what it’s designed for: pushing snow efficiently to the side.

Wonderful shovel and for winter of 2025/26 its been incredibly helpful. Sadly when I want to buy another for my son it didn't seem to be available in the 24 inch version. Can't imagine using the 4' version that's a lot of snow to push when it wet sloppy stuff

Very good but too expensive for a Snowplow. Its very effective on powdery or light snow. Unfortunately its not good at lifting heavy and wet snow. And the price is too high!

It's good quality 👌🏼 but not for the price. I am not sure what I was thinking because you still have to push it with your human hands 💩 So far doing well after one winter of use. I'll keep updating the review overtime