Leviton RTF01-10Z IllumaTech 1.5A Quiet Step Rotary Fan Speed Control, Single Pole, White/Ivory/Light Almond

I tried to use a standard light switch dimmer for the ceiling fan in my daughter's room. I will never do that again.1. Makes a noticeable buzzing sound when on lower speeds and light buzzing at full speed.2. The full speed setting only allowed the fan to spin at a medium speed.This unit was easy to install (make sure you have a cheap $5 tester to determine the hot wire. In our house, the builder was cheap and used black wires for hot and neutral. The ground is straight copper).VERY IMPORTANT: IF YOU DO NOT UNDERSTAND POWER AND WIRING, GET AN ELECTRICIAN TO DO THE WORK AND WATCH WHAT THEY DO. HAVE THEM PUT IN AT LEAST TWO DIFFERENT DEVICES SO YOU CAN SEE WHAT THEY ARE DOING. ASK QUESTIONS. LOOK UP YOUTUBE TUTORIALS FROM ELECTRICIANS TO GET A BETTER UNDERSTANDING. DON'T SAVE $100 BUCKS AND CAUSE A FIRE!I used the chain on the ceiling fan to verify that it was on the high setting and then tested the switch on low, medium and high.Completely silent and I get the proper speeds.

Works well. I have a working fan again!

I bought this switch As a replacement for one where the inside of the knob had stripped out, not because the switch had failed. As far as installing goes, these type of components all connect in the same manner. Two or three wires out the back so a swap out was easy and super fast, about 5 minutes, and I had to purchase a new wall plate ($2) to accommodate a different style switch. Operationally, the switch rotates smoothly. I especially like that the OFF, MAX, HIGH, MED, LOW position markings are easy to read. Likewise, the OFF position is on one end of the switch - not on both ends like other switches. I prefer this arrangement. Lastly, it looks great and has a high end look. Definitely will by another.

the rotary dial button is small and slippery. It needs to be firmly gripped to turn. If the dial had a bigger diameter and was textured then that would solve the problem.

I have a 52" Hunter ceiling fan (similar to https://www.amazon.com/Hunter-53091-Builder-Fan-Brazilian/dp/B00DF4ICX0) in my bedroom and recently rewired it so that the wall switch has separate light and fan controls. I have been on a hunt to find a ceiling fan speed controller that has good settings. I originally bought a Leviton DSF01-10Z (https://www.amazon.com/gp/product/B00NJ298BI) because I thought it looked better, more discrete. But I was unhappy with the speed settings on this controller. The high was like hurricane force and the medium was too slow. The low setting was like nothing. This controller may work well for ceiling fans that move more air, but not mine.What I wanted was one that had a speed somewhere between the high and the medium of my current controller. So I bought this one because one reviewer said that the high setting on this was between the high and medium of their controller. It is. In fact here's how I would rate the speeds of these two controllers:This controller :: Leviton DSF01Max = HighHigh > MediumMedium > MediumLow = MediumLow > LowSo, if you want a fan speed controller with an overall higher level of speed settings, this is your controller. I'm happy with this purchase, even though I think it looks pretty stupid. I'm truly happy with the speed settings and think that they are very appropriate settings for my Hunter fan. I hope this helps whomever may be trying to decide between all the different fan speed controller options.

Old switch and pull chain out. Wall switch with several speeds in. Installed easily, got new switch plate to accommodate size. Love it! Good value!

Well, this switch is just meh. It's deeper than my prior rotary fan switch, which in a crowded electrical box, makes installation a little difficult. The knob is smooth and glossy, and not very tall, and small, making it hard to grip and turn, why not some texture or knurling?. The 5 positions don't correspond to the printed positions on the cover plate (the knob rotates about 180 degrees, but the printed positions are on a narrower arc), so it's sort of confusing which setting the knob/switch is set to. I'm using this on a Broan bath fan, the lowest speed setting is sort of useless. About the only positive thing is that it includes three colors (white, beige, almond), but I only needed the white, so the extra plastic is just going to recycling. I guess it does function, so there's that....

Got this as a replacement to my fan switch. This product was easy to install and it looked pretty. I would recommend this controller to friends.

I installed this for my ceiling fan.It was an easy install and works perfect.Now I don't have to reach up and pull the chains on my fan to stop or change speeds.Perfect for houses with high ceilings.

Quedo a la perfección para mi ventilador y los niveles de velocidad excelentes

Funciona bien y llegó rápido

Excellent condition and worked great

Très bon, c’est le troisième que j’installe. Il est identique aux deux autres qui fonctionnent depuis plus de 10 ans, 24h par jour. Le contact électrique entre les changements de niveau peu s’avérer déficient mais à vous de placer le bouton du gradateur correctement sur son contact. Notez aussi que mes interrupteurs sont installés sur des ventilateurs à basse puissance (50 Watts maximum).