iFlight 4pcs XING-E Pro 2207 1800KV Brushless Motor 6S for QAV FPV Racing Drone Quadcopter

Good motors that are very powerful under anything over 1/4 throttle and can easily clear a tree in a split second if you happen to not see it like i tend do lol.These are the stock motors on the iFlight Nazgul5 V2 6S 1600Kv I have. I needed a replacement motor because of stupid issue so i bought a set to have for the future and kept the old one as spare parts for the Metal motor bell or bearings because it was fairly new.I knocked into a tree with a bunch of leaves and had to disarm and the drone dropped and hit something on the way down that broke the arm.Which was no big deal, took 5 mins and is a 8$ part.However somehow when that motor Arm broke, close to the drone center body, one of the motor wires somehow broke off the motor, but it broke at the spot where its still the motor winding, and then there's the three of them coming out to meet the esc wires basically.It broke so far up in the motor for some reason that it wasnt repairable without take the winding apart maybe but it doesn't even seem doable or worth it.I replaced just the one and kept the other 3 motors as backups for the future since theyre identical and finding one specific motor in the future is usually hard.Anyway these motors have a ton of power and get the GPS speed up to 121mph as the highest in the post flight list. They also really wake up when on 6S and full throttle they sound so good and can pull easily what my batteries put out usually about 120A on a full throttle run.Theyre also great on 4s as well, especially for learning and for less weight. They have enough power that even on 4S they dont feel underpowered at all, if anything the throttle is alittle more manageable.If I was to do it over again, because these motors dont even get warm i prob would of tried something alittle higher Kv like a 1800-1900kv.I also think these motors would be perfect for running a nice 5S Lipo which would be a good balance of power, weight and runtime for higher mAh 4S packs vs smaller 1.1aH 6s Lipos.The 5s would be just alittle more power than the 4s batteries but not so crazy like a 6s can get in small areas when you're trying to stay in a path or something where you can't just punch out if you get in trouble.Anyway, i highly recommend these to anyone. Theyre a great budget mid-teir motor that actually lasts! Bearings look to be big and good quality and the metal finish on the motor bell housing is a nice touch and makes them look premium for sure. Plus knurled area for the Prop to grip on too.

I used these on my first custom built fpv drone and I’m very happy with them. They seem to have plenty of power, even for my relatively heavy 5” drone (if you don’t know, when referring to a drone as an x inch, your referring to the propeller diameter, so my drones props are 5 inches across) They’ve been through a couple hard crashes and came out fine, although admittedly there was no direct impact on the motors. Overall, good for the price

I originally bought mr Steele 1750kv v3 motors “top of the line” I found them to be underpowered and they were very fragile. I bent two bells on a “run of the mill” crash in grass. I bought these to build a cheaper quad I could fly a bit harder to get better at racing and freestyle. I swapped my mr Steele for these until my bells came for my motors with the bent bells. I never went back! Great power, good throttle resolution, responsive and they have taken a beating and just keep on going! No bent bells, they take any 5 inch prop. I now have 2 sets on 2 different quads, they are great little motors. Just buy a set already you won’t regret it. Also they are pretty quiet on BF with Rpm filtering. Also I get 4-7 min Flights with 5045 cyclone props, 6s 1300mah battery. I fly at 30-40% throttle and punch out quite a bit. Great motors I’m ordering another set for my TBS source one V3 build.

Great and powerful motors!! Put a beating on them and still running strong... Price not bad either.. great product

These motors are great. I've been flying with them for about 6 weeks. Very responsive, not the BEST power, but for the size - just great. I even had a nasty pavement crash... and while they took some road rash, no performance problems. Overall very satisfied.

If your getting these to replace a motor on your nazgul5 just remember that’s these one are for 6s and you will need to cut the wires by about 3 inches but always measure for yourself and re tin them. Great motors though seems to spin even smother then that ones that came on my Nazgûl5 v2 but I’m sure there probably just not broken in yet, no complaints and Amazon coming in clutch with the Sunday morning delivery cus that’s my only off day on the weekend and I wanted to fly and was able to!

Great motor for the price. Reliable quality motors with lots of smooth power. And not too battery hungry if your not super aggressive with the throttle.

These motors are indeed very durable, but they cannot handle 6S voltage while being attached to a 7 inch prop. Good for 5 inch props on 6S battery, but not 7 inch props on 6S battery. They will work on a 7 inch quad if you use a 4S battery though. Get 1300KV motors if you want 6S 7 inch.