10 Pack 90 Degree Soft Close Surface Mount Spring Hinges, Easy Installation No Pre-drilled, Noiseless Frameless Hidden Concealed Kitchen Cabinet Hinge for Cupboard Folded Replacement Hardware

Great deal. Worked very well for bench seating.

Easy to use but a little difficult to install depending on the cabinet. The appearance is nice since they’re on the inside, little hard to open but the soft close is really nice.

Tried these for a non-door project. They worked better than expected. Used them for hidden hinges for the top of a box. A little tricky to install because they are hidden. No fault of product. These easily held the top up when open and allowed a slow close without slamming and pinching fingers.

Bought a pack of 10, so far not a single hinge pair has had all the needed screws. I am missing either one or two screws for every pair of hinges (each hinge needs 8 screws).

These hinges have too much mechanical play in them. After installing them the first time with clamps holding the doors in place and installed per the instructions, they sagged an eighth of an inch when the clamps were removed. I had to unscrew the base of the hinges and slide them up to anticipate the sag. It worked.They don't really self-close without some help which defeats the self-closing feature.There are no vertical adjusting holes which aggravated the process. They have horizontal holes, but if you follow the instructions, you really don't need them much.The screws are really cheap also. The heads either stripped out or broke off. And yes, I was using the correct size screwdriver. I was given enough screws to install ten hinges. With the breakage, I cannot install the two remaining hinges. It does not really matter though as I threw them away.

These are awesome, took my kitchen out of the 80's and 90's!

Supposed to be soft closing, but does not close cabinet doors all the way.

I ordered new cabinet doors for my cabinets and needed hidden hinges to complete the update Most. Id den hinges have the sunken round side that attaches to the door but I did not want to cut out precision holes so I took a chance on these that did not require boring holes. The hinges require a flat surface inside the cabinet wall that is at least an 1 1/2” to support and attach it. I added 3/4” sq dowels to the inside of my cabinets that did not have a flat wall to attach but only the cross bar. The dowels provided the necessary filler to securely attach the brackets to the j side of the cabinet. The hinges are strong and well made and give your cabinets a more updated look. I would recommend these hinges. I now need to find soft close drawer slides for all wooden drawers.